Flow Chart of Yarn Path for Circular Knitting Machine

Circular knitting is a form of knitting that creates a seamless tube. A circular knitting machine is used for manufacturing seamless tubes. This machine is used for the manufacturing of knit fabrics can be divided into machines with individually driven needles and needle bar machines. It widely used in the knitting industry. In this article, I will give a flowchart of the working process I mean of yarn path of circular knitting machine

Circular knitting machine

FlowChart of Circular Knitting Machine:

Cone in creel

Yarn supply pipe

Magnetic disc

Positive feeder

Yarn sensor

Feeder & guide

Needle

In this machine, yarn count basically dependent on the needle pitch. As the diameter of yarn is proportional to its yarn count in the direct system, a relationship exists between the range of optimum counts of yarn that could be knitted on a particular machine and the gauge of the machine. Machine gauge could play an influential role in the choice of yarn count and can have an effect on fabric properties. Thus it’s essential to obtain an optimal balance of yarn count and machine gauge in order to ensure the best knitting performance for a specific machine gauge and structure, with a high machine efficiency and minimum fabric fault rate.

Circular knitting machines always produces a tube-shaped fabric. It exists in different sizes or diameters, though it’s depending on the field of application. The needles & sinkers in the machine are arranged in a circle.

Circular Knitting Machines may divide into two different types. Depending on the number of sets of needles:

    1. Single set: plain.
    2. Two sets: rib, interlock, spacer fabric.

Both single set and double set machines have also existed as Jacquard machines. Those needed for special designs. In these machines, the movement of each needle could control by each cam. Common products that might produce with circular knitted fabric are T-shirts. For production, nearly every material could use. The form varies from the filament to staple fiber yarn.

Author of this Article

Rofiquzzaman Raju
Fabric Technologist,
B.J.Group, Mawna, Gazipur
Email: [email protected]

Sharing is caring!

Leave a Comment