The sewing section is the most important department of the garment manufacturing industry. Because after receiving the components of the garment from the cutting section, all the garment’s cut parts are assembled here. Flow chart of quality control in sewing section will discuss below:
Quality Control in Sewing Section:
Input material checking
Cut panel and accessories checking
The machine is in good condition
Thread count check
Special work like embroidery, printing panel check
Needle size checking
Stitching fault should be checked
Garments measurement check
Seam fault check
Size mistake check
Mismatching matching of trimming
Shade variation within the cloth
Wrong placement of interlining
Creased or wrinkle appearance control
All the above processes are discussed below:
|1. Input material check
|Here all the input materials should be checked to complete all the sewing processes accurately.
|2. Cutting panel and accessories checking
|All the cutting panels and accessories should be checked here to avoid mismatching.
|3. Checking the sewing machine
|According to the buyer’s approved sample, the right sewing machine should be selected here.
|Sewing thread checking
|Sewing thread should be selected here according to buyers approved sample.
|4. Sewing needle checking
|Here, the required size needle should be selected to complete fault-free sewing.
|5. Embroidery and printing panel checking (If there)
|If there’s any embroidery or print lies in the garments, then it should be checked by maintaining buyers approved sample.
|6. Stitching fault checking
|After making the garments, here clothing checked to identify stitch fault free garments.
|7. Seam fault checking
|After checking the stitch, all the seam of garments must be checked here.
|8. Measurement checking
|According to the buyer’s instruction, garments measurement has to check here.
|9. Shade variation checking
|Sometimes various types of shade variation have been seen in the garments that should be checked here.
|10. Size mistake checking
|Extra checking has needed here.
|11. Trimmings checking
|According to the buyer’s approved sample, required trimmings of garments should be checked here to make fault free garments.
|12. Interlining checking
|Interlining checking should be done here by the quality inspector whether it is perfect or not.
|13. A crease or wrinkle appearance checking
|It is the last process of quality control in the sewing section, where the quality inspector confirms crease or wrinkle-free garments.
Author of this Article: Noor Ahmed Raaz Asst. Merchandiser A.M.C.S Textile Ltd Email: [email protected]